For the Horse Bits

The Acavallo gel bit guard is an asset to any bridle. A quick and effective way to protect the mouth from pinching and gain more bit control. Contoured gel protectors mould comfortably around the mouthpiece inside of the bit rings to minimize friction and rubbing. These unique guards keep the bit perfectly straight in the mouth allowing for better turning and responsiveness. A real aid for trainin…

Featuring a concave (curved inward) shape on their inner surface (to the mouth) and a convex (curved outward) shape on their outer surface (to the bit ring), these bit guards eliminate the need of the formerly used projecting protectors. The advantages of this new design are quite obvious: Risks of rubbing or chafing on the outer skin of the mouth corners are mitigated, as these sensitive areas re…

Featuring a concave (curved inward) shape on their inner surface (to the mouth) and a convex (curved outward) shape on their outer surface (to the bit ring), these bit guards eliminate the need of the formerly used projecting protectors. The advantages of this new design are quite obvious: Risks of rubbing or chafing on the outer skin of the mouth corners are mitigated, as these sensitive areas re…

Bevel bit allowing mild leverage with a copper lozenge to assist with salivation How to measure your bit: A correctly fitting bit should have a fingers width on either side of the horses mouth. To ensure your new bit fits correctly measure the length of the mouthpiece from inside of the rings, as illustrated below. Most bits are sold in inches, although some European bits (eg Sprenger bits) are so…

Loose ring bevel allows a mild lever action. How to measure your bit: A correctly fitting bit should have a fingers width on either side of the horses mouth. To ensure your new bit fits correctly measure the length of the mouthpiece from inside of the rings, as illustrated below.

BEVEL BIT WITH LOZENGE The bevel bit allows mild leverage, with a brass alloy lozenge to assist with salivation. How to measure your bit: A correctly fitting bit should have a fingers width on either side of the horses mouth. To ensure your new bit fits correctly measure the length of the mouthpiece from inside of the rings, as illustrated below.

Mounted with leather backing and slit. Sold singly.

Designed to help prevent the bit pinching the horses lips, bit guards are most often seen on bridles which have loose ring snaffles. Sold in pairs. Comes in Black and Brown colours.

Attaches a bit easily to your headcollar.

Sold in pairs.

Quality English leather with brass fittings, one size, Ideal for sales preparation.

Blenheim Chifney Bit Strap Stitched Blenheim leather headpiece for a chifney bit, with hook stud billets. Colour: Black, Havana

Replacement leather straps for the English hackamore. COMPOSITION Blenheim quality leather BRAND Blenheim

The bevel bit allows mild leverage and offers a little more control, promoting outline, head carriage and responsiveness. The loose brass alloy discs in the centre can help to soothe a fussy tongued horse. Mouthpiece thickness: 15mm. Cheek height: 55mm (4.5", 5"), 70mm (5.5").

Stainless Steel w/ Blue Alloy Moutchpiece Blue Alloy oxidises easily to create a warm and sweet taste which helps with bit acceptance and encourages salivation. Please note the blue colour will fade with use. The addition of brass alloy inserts produces a warm, more palatable bit. Blue Alloy Bevel with Roller Link The bevil bit allows mild leverage and offers a little more control, promoting outli…

The fixed rings prevent pinching, whilst the brass alloy double joint distributes pressure over both the tongue and bars of the mouth to encourage mouthing and contact. Mouthpiece thickness: 14mm. Cheek height: 55mm (4.5", 5"), 75mm (5.5", 6").

Full cheeks assist with steering, whilst the lozenge prevents the nutcracker action of a single joint. Mouthpiece thickness: 14mm. Cheek height: 160mm.

Stainless Steel w/ Blue Alloy Moutchpiece Blue Alloy oxidises easily to create a warm and sweet taste which helps with bit acceptance and encourages salivation. Please note the blue colour will fade with use. The addition of brass alloy inserts produces a warm, more palatable bit. The hanging cheek bit exerts a little poll pressure to encourage flexion. The loose brass alloy discs in the centre ca…

The hanging cheek exerts a little poll pressure to encourage flexion. The brass alloy double joint distributes pressure over both the tongue and bars of the mouth to encourage mouthing and contact. Mouthpiece thickness: 13mm. Cheek height: 110mm.

This loose ring bit can discourage fixing as it has much more movement in the horse's mouth. The hollow mouth is significantly lighter than those with a solid mouthpiece. Mouthpiece thickness: 18mm. Cheek height: 50mm (4.5", 5"), 65mm (5.5", 6").

The loose ring cheek can discourage fixing and leaning as it has much more movement than a fixed cheek to follow the angle of the tongue. The shaped lozenge offers even pressure and encourages mouthing and contact. COMPOSITION Stainless steel, blue sweet iron mouthpiece FABRIC GUIDE Stainless steel is the most common material for bits. Durable, easy to clean, tasteless and it does not rust. Blue s…

Blue Sweet Iron Loose Ring With Mullen Mouth The mullen mouth is very stable in the horse’s mouth. It has a medium port creating space for the tongue and relieving pressure. Stainless steel is the most common material for bits. Durable, easy to clean, tasteless and it does not rust. Blue sweet iron oxidizes easily to create warmth and a sweet taste which helps with bit acceptance and encourages sa…

Blue Sweet iron Loose Ring With Roller Link The loose ring cheek has greater movement than a fixed cheek allowing it to follow the angle of the tongue which can discourage fixing and leaning. The loose brass alloy discs in the centre can help to soothe a fussy tongued horse. Stainless steel is the most common material for bits. Durable, easy to clean, tasteless and it does not rust. Blue sweet iro…

This bit is often used to help with control. The lozenge distributes pressure over both the tongue and bars of the mouth. Can be used with double reins or Pelham roundings. Mouthpiece thickness: 14mm. Cheek height: 125mm (4.5"), 130mm (5"), 140mm (5.5", 6").

The two ring cheeks allow adaptable poll pressure and leverage on the mouthpiece. The anatomical double joint distributes pressure over both the tongue and bars of the mouth encouraging mouthing and contact. Stainless steel is the most common material for bits. Durable, easy to clean, tasteless and it does not rust. Blue sweet iron oxidizes easily to create warmth and a sweet taste which helps wit…

Stainless Steel w/ Blue Alloy Moutchpiece Blue Alloy oxidises easily to create a warm and sweet taste which helps with bit acceptance and encourages salivation. Please note the blue colour will fade with use. The addition of brass alloy inserts produces a warm, more palatable bit. Combines poll pressure and leverage, for a mild gag action. The loose brass alloy discs in the centre can help to soot…

This bit has a lifting action so can help reduce the horse leaning on the bit. Attaching the reins to the lower rings will increase the severity, so should be used with care. Mouthpiece thickness 14mm. Cheek height: 135mm.

The curved mouthpiece on this bit allows more room in the mouth, making it suitable for horses with large tongues or small mouths. Mouthpiece thickness: 16mm. Cheek height: 50mm (4.5", 5"), 65mm (5.5").

A thinner mouthpiece can make this bit a little stronger, however it may be more comfortable for horses with small mouths or large tongues. The fixed rings prevent pinching. Mouthpiece thickness: 12mm. Cheek height: 55mm (4.5", 5"), 75mm (5.5", 6").

The fixed rings prevent pinching, whilst the brass alloy double joint distributes pressure over both the tongue and bars of the mouth to encourage mouthing and contact. Mouthpiece thickness: 13mm. Cheek height: 55mm (4.5", 5"), 75mm (5.5", 6").