Sweet Iron

The bevel bit allows mild leverage and offers a little more control, promoting outline, head carriage and responsiveness. The loose brass alloy discs in the centre can help to soothe a fussy tongued horse. Mouthpiece thickness: 15mm. Cheek height: 55mm (4.5", 5"), 70mm (5.5").

Stainless Steel w/ Blue Alloy Moutchpiece Blue Alloy oxidises easily to create a warm and sweet taste which helps with bit acceptance and encourages salivation. Please note the blue colour will fade with use. The addition of brass alloy inserts produces a warm, more palatable bit. Blue Alloy Bevel with Roller Link The bevil bit allows mild leverage and offers a little more control, promoting outli…

The fixed rings prevent pinching, whilst the brass alloy double joint distributes pressure over both the tongue and bars of the mouth to encourage mouthing and contact. Mouthpiece thickness: 14mm. Cheek height: 55mm (4.5", 5"), 75mm (5.5", 6").

Full cheeks assist with steering, whilst the lozenge prevents the nutcracker action of a single joint. Mouthpiece thickness: 14mm. Cheek height: 160mm.

Stainless Steel w/ Blue Alloy Moutchpiece Blue Alloy oxidises easily to create a warm and sweet taste which helps with bit acceptance and encourages salivation. Please note the blue colour will fade with use. The addition of brass alloy inserts produces a warm, more palatable bit. The hanging cheek bit exerts a little poll pressure to encourage flexion. The loose brass alloy discs in the centre ca…

The hanging cheek exerts a little poll pressure to encourage flexion. The brass alloy double joint distributes pressure over both the tongue and bars of the mouth to encourage mouthing and contact. Mouthpiece thickness: 13mm. Cheek height: 110mm.

This loose ring bit can discourage fixing as it has much more movement in the horse's mouth. The hollow mouth is significantly lighter than those with a solid mouthpiece. Mouthpiece thickness: 18mm. Cheek height: 50mm (4.5", 5"), 65mm (5.5", 6").

The loose ring cheek can discourage fixing and leaning as it has much more movement than a fixed cheek to follow the angle of the tongue. The shaped lozenge offers even pressure and encourages mouthing and contact. COMPOSITION Stainless steel, blue sweet iron mouthpiece FABRIC GUIDE Stainless steel is the most common material for bits. Durable, easy to clean, tasteless and it does not rust. Blue s…

Blue Sweet Iron Loose Ring With Mullen Mouth The mullen mouth is very stable in the horse’s mouth. It has a medium port creating space for the tongue and relieving pressure. Stainless steel is the most common material for bits. Durable, easy to clean, tasteless and it does not rust. Blue sweet iron oxidizes easily to create warmth and a sweet taste which helps with bit acceptance and encourages sa…

Blue Sweet iron Loose Ring With Roller Link The loose ring cheek has greater movement than a fixed cheek allowing it to follow the angle of the tongue which can discourage fixing and leaning. The loose brass alloy discs in the centre can help to soothe a fussy tongued horse. Stainless steel is the most common material for bits. Durable, easy to clean, tasteless and it does not rust. Blue sweet iro…

This bit is often used to help with control. The lozenge distributes pressure over both the tongue and bars of the mouth. Can be used with double reins or Pelham roundings. Mouthpiece thickness: 14mm. Cheek height: 125mm (4.5"), 130mm (5"), 140mm (5.5", 6").

The two ring cheeks allow adaptable poll pressure and leverage on the mouthpiece. The anatomical double joint distributes pressure over both the tongue and bars of the mouth encouraging mouthing and contact. Stainless steel is the most common material for bits. Durable, easy to clean, tasteless and it does not rust. Blue sweet iron oxidizes easily to create warmth and a sweet taste which helps wit…

Stainless Steel w/ Blue Alloy Moutchpiece Blue Alloy oxidises easily to create a warm and sweet taste which helps with bit acceptance and encourages salivation. Please note the blue colour will fade with use. The addition of brass alloy inserts produces a warm, more palatable bit. Combines poll pressure and leverage, for a mild gag action. The loose brass alloy discs in the centre can help to soot…

This bit has a lifting action so can help reduce the horse leaning on the bit. Attaching the reins to the lower rings will increase the severity, so should be used with care. Mouthpiece thickness 14mm. Cheek height: 135mm.

Blue Sweet Iron Tom with Roller Link Especially good for jumping the Tom Thumb cheek has a lifting effect in front and offers more control and precision. The loose brass alloy discs in the centre can help to soothe a fussy tongued horse. Stainless steel is the most common material for bits. Durable, easy to clean, tasteless and it does not rust. Blue sweet iron oxidizes easily to create warmth and…

510 COPPER LOZENGE FRENCH LINK SNAFFLE The sweet iron and copper combination used in this training bit provides a warm bit for the horse which encourages salivation and emits a pleasant taste. How to measure your bit: A correctly fitting bit should have a fingers width on either side of the horses mouth. To ensure your new bit fits correctly measure the length of the mouthpiece from inside of the…

523 DOUBLE JOINTED SWEET IRON PELHAM Pelham's work on the poll, corner, bars, tongue and chin groove. This bit will assist will control but the jointed mouth piece will lesson the 'nutcracker' action and the copper and sweet iron will encourage the horse to be softer in the mouth. How to measure your bit: A correctly fitting bit should have a fingers width on either side of the horses mouth. To en…

The sweet iron mouthpiece of this bit produces a pleasant taste and encourages the horse to soften and salivate. The raised copper ribs can help to prevent the horse taking too much of a hold. COMPOSITION Stainless steel, sweet iron mouthpiece FABRIC GUIDE Stainless steel is the most common material for bits. Durable, easy to clean, tasteless and it does not rust. Sweet iron mouthpieces are design…

This most useful bit allows a small amount of poll pressure whilst still being a snaffle, an essential piece of kit for any equestrian! How to measure your bit: A correctly fitting bit should have a fingers width on either side of the horses mouth. To ensure your new bit fits correctly measure the length of the mouthpiece from inside of the rings, as illustrated below. Stainless Steel with Sweet I…

This hanging cheeck bit is useful in allowing a small amount of poll pressure whilst still being a snaffle. The sweet iron and copper link aids salivation and acceptance. 522R with raised ribs. How to measure your bit: A correctly fitting bit should have a fingers width on either side of the horses mouth. To ensure your new bit fits correctly measure the length of the mouthpiece from inside of the…

549 LOOSE RING WATERFORD BIT The Waterford bit is composed of many different links making it hard for the horse to pull against and lean on. It is a severe bit. How to measure your bit: A correctly fitting bit should have a fingers width on either side of the horses mouth. To ensure your new bit fits correctly measure the length of the mouthpiece from inside of the rings, as illustrated below. Sta…

519 SWEET IRON BEVEL BIT This bit allows the rein to be attached to a definite part of the bit ring and aids with control. How to measure your bit: A correctly fitting bit should have a fingers width on either side of the horses mouth. To ensure your new bit fits correctly measure the length of the mouthpiece from inside of the rings, as illustrated below. Stainless Steel with Sweet Iron Mouthpiec…

This sweet iron and copper combination provides the horse with a warm and pleasant tasting bit. The roller in the centre is rough creating an uneven surface, which increases the bit’s severity. How to measure your bit: A correctly fitting bit should have a fingers width on either side of the horses mouth. To ensure your new bit fits correctly measure the length of the mouthpiece from inside of the…

The sweet iron and copper combination in this bit help to promote salivation and encourage softening. This bit does have a lever action. How to measure your bit: A correctly fitting bit should have a fingers width on either side of the horses mouth. To ensure your new bit fits correctly measure the length of the mouthpiece from inside of the rings, as illustrated below. Stainless Steel with Sweet…

The fixed rings prevent pinching, whilst the sweet iron mouthpiece encourages salivation. Mouthpiece thickness: 14mm. Cheek height: 55mm (4.5", 5"), 75mm (5.5", 6").

The fixed rings prevent pinching, whilst the sweet iron mouthpiece encourages salivation. As this mouthpiece is hollow, it is very light compared to those with a solid mouthpiece. Mouthpiece thickness: 21mm. Cheek height: 55mm (4.5", 5"), 70mm (5.5", 6").

This loose ring cheek can discourage fixing as it has much more movement than a fixed cheek. The hollow mouth is significantly lighter than those with a solid mouthpiece. Mouthpiece thickness: 18mm. Cheek height: 50mm (4.5", 5"), 65mm (5.5", 6").

The bevel bit allows mild leverage and offers a little more control, promoting outline, head carriage and responsiveness. The sweet iron encourages salivation. Mouthpiece thickness: 14mm. Cheek height: 55mm (4.5", 5"), 70mm (5.5").

A thinner mouthpiece can make this bit a little stronger, however it may be more comfortable for horses with small mouths or large tongues. The loose rings discourage fixing. Mouthpiece thickness: 13mm. Cheek height: 50mm (4.5", 5"), 65mm (5.5", 6").

This loose ring has a Waterford mouth made of many different links which makes it difficult for the horse to take a hold. This bit should be used under supervision or by an experienced rider. Mouthpiece thickness: 18mm. Cheek height: 65mm.