Skip to content

Stainless Steel

Bevel Bit with Copper Lozenge Bevel Bit with Copper Lozenge save
€24.31
Our price: €21.88
In stock
Bevel bit allowing mild leverage with a copper lozenge to assist with salivation How to measure your bit: A correctly fitting bit should have a fingers width on either side of the horses mouth. To ensure your new bit fits correctly measure the length of the mouthpiece from inside of the rings, as illustrated below. Most bits are sold in inches, although some European bits (eg Sprenger bits) are so…
Bevel Bit with Jointed Mouth Bevel Bit with Jointed Mouth save
€21.12
Our price: €19.01
In stock
Loose ring bevel allows a mild lever action. How to measure your bit: A correctly fitting bit should have a fingers width on either side of the horses mouth. To ensure your new bit fits correctly measure the length of the mouthpiece from inside of the rings, as illustrated below.
Cambridge Rugby Pelham Cambridge Rugby Pelham save
€46.32
Our price: €44.00
In stock
Cambridge Rugby Pelham Rugby Pelhams are widely used in showing as an alternative to the Weymouth and bradoon, as it gives the look of a double bridle. The cambridge port mouthpiece is alternative to the straight bar, which is ideal for horses with a larger tongue.
CE Loose Ring Snaffle Bit 5 Mouth 4 CE Loose Ring Snaffle Bit 5 Mouth 4" Diameter Ring Silver save
€21.70
Our price: €20.61
In stock
Loose ring snaffle bit 4" Diameter Ring Silver
Cheltenham Gag Cheltenham Gag save
€26.87
Our price: €24.18
In stock
This Cheltenham gag is sold without cheeks – these can be purchased separately. How to measure your bit: A correctly fitting bit should have a fingers width on either side of the horses mouth. To ensure your new bit fits correctly measure the length of the mouthpiece from inside of the rings, as illustrated below. Gags Gags are related to the snaffle but are more severe.  Gags work by using the ac…
Chifney Bit Chifney Bit save
€17.28
Our price: €15.55
In stock
The Chifney is not designed for riding, but is perfect for leading difficult horses or those that are likely to rear up. How to measure your bit: A correctly fitting bit should have a fingers width on either side of the horses mouth. To ensure your new bit fits correctly measure the length of the mouthpiece from inside of the rings, as illustrated below.
Continental 2 Ring Jointed Continental 2 Ring Jointed save
€29.95
Our price: €28.45
In stock
Continental 2 Ring Jointed This is ideally used with two reins or roundings with a single rein for the best effect. Exerts poll pressure and a limited gag action.
Dexter Bit - Half Cheek Dexter Bit - Half Cheek save
€45.95
Our price: €43.65
In stock
Dexer bit - Half cheek
Double Jointed, Copper Lozenge Pelham Double Jointed, Copper Lozenge Pelham save
€38.39
Our price: €34.55
In stock
Double lointed Pelham with copper lozenge, this bit is often used to help control, the double joint with lozenge will soften the nutcracker action and assist with salivation. How to measure your bit: A correctly fitting bit should have a fingers width on either side of the horses mouth. To ensure your new bit fits correctly measure the length of the mouthpiece from inside of the rings, as illustra…
Dutch Gag Dutch Gag save
€24.31
Our price: €21.88
In stock
This bit is made from stainless steel and is a conventional Dutch gag. How to measure your bit: A correctly fitting bit should have a fingers width on either side of the horses mouth. To ensure your new bit fits correctly measure the length of the mouthpiece from inside of the rings, as illustrated below. Gags Gags are related to the snaffle but are more severe.  Gags work by using the action of a…
Dutch Gag With French Link Dutch Gag With French Link save
€28.15
Our price: €25.34
In stock
This Dutch gag has a French link which works on different areas of the horse’s mouth. How to measure your bit: A correctly fitting bit should have a fingers width on either side of the horses mouth. To ensure your new bit fits correctly measure the length of the mouthpiece from inside of the rings, as illustrated below. Gags Gags are related to the snaffle but are more severe.  Gags work by using…
Dutch Gag With Waterford Mouth Dutch Gag With Waterford Mouth save
€26.87
Our price: €24.18
In stock
This dutch gag has a waterford mouth made of many different links which makes it hard for the horse to take hold of and pull against. How to measure your bit: A correctly fitting bit should have a fingers width on either side of the horses mouth. To ensure your new bit fits correctly measure the length of the mouthpiece from inside of the rings, as illustrated below. Gags Gags are related to the s…
English Hackamore English Hackamore save
€38.39
Our price: €34.55
In stock
This is an English Hackamore which makes up part of a bitless bridle. Although this bridle has no bit it is still potentially quite severe as it works the nose and poll. Bitless Bitless bridles or hackamores are not technically bits but are used as an alternataive.  Despite the lack of bit, bitless bridles can be very severe as they rely on points of control outside the horses mouth - especially t…
Flat Ring Eggbutt with Lozenge-S/STEEL Flat Ring Eggbutt with Lozenge-S/STEEL save
€29.43
Our price: €26.49
In stock
Fixed rings prevent pinching whilst the lozenge disperses the contact across the mouth to lighten the pressure applied to the edge of the tongue. Mouthpiece thickness: 14mm. Cheek height: 55mm (4.5", 5.5"), 75mm (5.5", 6").
Flat Ring Jointed Eggbutt Flat Ring Jointed Eggbutt save
€26.87
Our price: €24.18
In stock
This bit has a thin mouthpiece making it harsher on the horse’s mouth. How to measure your bit: A correctly fitting bit should have a fingers width on either side of the horses mouth. To ensure your new bit fits correctly measure the length of the mouthpiece from inside of the rings, as illustrated below.
French Link Bradoon French Link Bradoon save
€19.84
Our price: €17.86
In stock
This is a traditional French link with a flat plate. It has small loose rings making it perfect for horses with small heads and those who require more movement in the bit. How to measure your bit: A correctly fitting bit should have a fingers width on either side of the horses mouth. To ensure your new bit fits correctly measure the length of the mouthpiece from inside of the rings, as illustrated…
French Link Eggbutt French Link Eggbutt save
€25.59
Our price: €23.03
In stock
The flat rings on this French link sit flush against the horse’s face. How to measure your bit: A correctly fitting bit should have a fingers width on either side of the horses mouth. To ensure your new bit fits correctly measure the length of the mouthpiece from inside of the rings, as illustrated below.
French Link Loose Ring Snaffle French Link Loose Ring Snaffle save
€21.75
Our price: €19.58
In stock
Medium loose ring bradoon with traditional flat French link mouth piece How to measure your bit: A correctly fitting bit should have a fingers width on either side of the horses mouth. To ensure your new bit fits correctly measure the length of the mouthpiece from inside of the rings, as illustrated below.
French Link Rugby Pelham French Link Rugby Pelham save
€41.71
Our price: €39.62
In stock
French Link Rugby Pelham French link mouthpiece relives the nutcracker action and prevents palate pressure. Designed to be used with two reins.
Full Cheek Eggbutt Snaffle Full Cheek Eggbutt Snaffle save
€26.87
Our price: €24.18
In stock
This traditional full cheek eggbutt snaffle has fixed rings to prevent pinching a single link. How to measure your bit: A correctly fitting bit should have a fingers width on either side of the horses mouth. To ensure your new bit fits correctly measure the length of the mouthpiece from inside of the rings, as illustrated below.
Full Cheek French Link Snaffle Full Cheek French Link Snaffle save
€28.15
Our price: €25.34
In stock
This bit has a French link to provide horses who don’t like the nutcracker action with another alternative. How to measure your bit: A correctly fitting bit should have a fingers width on either side of the horses mouth. To ensure your new bit fits correctly measure the length of the mouthpiece from inside of the rings, as illustrated below.
Full Cheek Jointed Mouth with Keys Full Cheek Jointed Mouth with Keys save
€28.15
Our price: €25.34
In stock
This full cheek jointed bit has players and is great for young horses, especially with full cheeks to assist with steering. How to measure your bit: A correctly fitting bit should have a fingers width on either side of the horses mouth. To ensure your new bit fits correctly measure the length of the mouthpiece from inside of the rings, as illustrated below.
Full Cheek Snaffle Waterford Mouth Bit Full Cheek Snaffle Waterford Mouth Bit save
€28.15
Our price: €25.34
In stock
This bit has full cheeks to help with steering and a mouthpiece made up of many different links to make it harder for the horse to pull against. How to measure your bit: A correctly fitting bit should have a fingers width on either side of the horses mouth. To ensure your new bit fits correctly measure the length of the mouthpiece from inside of the rings, as illustrated below.
Full Cheek Snaffle With Copper Peanut Full Cheek Snaffle With Copper Peanut save
€28.15
Our price: €25.34
In stock
The peanut copper link in this bit provides a warm metal for the horse’s mouth and also helps to encourage movement. This is a great bit for schooling. How to measure your bit: A correctly fitting bit should have a fingers width on either side of the horses mouth. To ensure your new bit fits correctly measure the length of the mouthpiece from inside of the rings, as illustrated below. Copper:  A c…
Hanging Cheek French Link Snaffle Hanging Cheek French Link Snaffle save
€24.96
Our price: €22.46
In stock
This hanging cheek has a French link for horses who do not like a nutcracker action. How to measure your bit: A correctly fitting bit should have a fingers width on either side of the horses mouth. To ensure your new bit fits correctly measure the length of the mouthpiece from inside of the rings, as illustrated below.
Hanging Cheek Snaffle Hanging Cheek Snaffle save
€23.68
Our price: €21.31
In stock
This hanging cheek snaffle has a single joint and is designed to prevent the horse from getting his tongue over the bit. It also exerts pressure on the horse’s poll to encourage a lower head carriage. How to measure your bit: A correctly fitting bit should have a fingers width on either side of the horses mouth. To ensure your new bit fits correctly measure the length of the mouthpiece from inside…
Hanging Cheek Snaffle with Lozenge Hanging Cheek Snaffle with Lozenge save
€25.59
Our price: €23.03
In stock
6274 HANGING CHEEK BRADOON WITH LOZENGE Hanging cheeks allow light pressure to help encourage flexing, whilst the lozenge prevents the 'nutcracker' effect of a single joint. How to measure your bit: A correctly fitting bit should have a fingers width on either side of the horses mouth. To ensure your new bit fits correctly measure the length of the mouthpiece from inside of the rings, as illustrat…
Hanging Cheek Waterford Bit Hanging Cheek Waterford Bit save
€25.59
Our price: €23.03
In stock
The waterford mouth is made up of many links making it severe if the horse pulls, but comfortable if he and the rider are relaxed. The hanging cheeks allow a little pressure to help encourage flexing. How to measure your bit: A correctly fitting bit should have a fingers width on either side of the horses mouth. To ensure your new bit fits correctly measure the length of the mouthpiece from inside…
Hanging Cheek, Copper Lozenge Snaffle Hanging Cheek, Copper Lozenge Snaffle save
€28.15
Our price: €25.34
In stock
Hanging cheeks help to encourage flexion, whilst the copper lozenge prevents the nutcracker effect of a single joint and encourages salivation.
Hollow Mouth Eggbutt Hollow Mouth Eggbutt save
€23.68
Our price: €21.31
In stock
This eggbutt snaffle has a hollow mouthpiece meaning that it is lighter than a standard solid mouthpiece. Due to its lightweight nature, hollow mouth bits are renowned for being softer than solid bits. How to measure your bit: A correctly fitting bit should have a fingers width on either side of the horses mouth. To ensure your new bit fits correctly measure the length of the mouthpiece from insid…
Trustpilot